SF-16

Product Name : SF-16
Product Description
Wire and Strip Stamping & Forming Machine

 

SF-Series
  1. Double cam slide to enforce slide return
  2. Schneider Servo System and Electronic Components
  3. Material feeder(Gripper type) precision +/-0.015mm
  4. With programmable timing of Input/Output signal, available to connect to external device, such as: timing of solenoid, inner/outer thread cutter, welding machine, assembly machine etc.
Inquiry
SF-16 Wire and Strip Stamping & Forming Machine
SF-16 Wire and Strip Stamping & Forming Machine
Product Introduction
Wire and Strip Stamping & Forming Machine
  • Double cam slide to enforce slide return
  • Schneider Servo System and Electronic Components

Features:

1. Hybrid Machining Process: AMAX wire/strip machine is CNC Servo Control, with I/O port to connect to the external devices, such as tapping, welding, press machine, and so on. That enables Amax users to edit programs to launch external devices to work with AMAX machine. Nowadays our customers need not only a single machine but also an automatic production line. For saving labors or future requirements, Amax machine is what you really need. The following link is one of the production lines which we have ever designed:

2. Save material: Press machine requires a material chain to keep feed-in continuously. Otherwise, to dispatch an operator to hand material to feed piece by piece will be a worse choice. Fortunately, Amax machine can run without a material chain. Hence, our machine uses narrower material than the press machine. For the same component, Amax users will spend much less material than press machine. That is why our customers have saved a lot comparing to another competitor!

3. Easy maintenance and set-up: The die and tool position and stroke of the press machines are almost fixed. But those of Amax machine and stroke can be set easily, especially for the adjustment of some specific die and tool.

4.Automation production line available: The features of Amax machine enable our machine can be part of the automation production line. Or we can build an automation production line for your specific purpose (Turnkey Solution).

Comparison with similar machines

1. Spring coiler: more suitable for forming round wire, can not perform punching operations, production speed relatively slow.

2. Press: single movement, independent adjustment of a single dimension is inconvenient, the whole tool-set needs to be changed, not suitable for connecting external equipment, a large amount of waste, high risk to the operator.

Future development

At present moment, the forming machine accounts for only a small portion of the market because qualified technical personnel is scarce. However, its production efficiency, stability, multiple functions, and safety is superior to those of the press. In the future, as production technologies imporve, forming machines will gradually take over the press market. As technical personnel gradually becomes familiar with forming machines, they are becoming more widespread. Therefore the market share of the forming machine is expected to see a dramatic increase.

Applicable samples：
Medical Stitching, Spring Clamp, W-shaped Clip, Parts for lightbulb

proimages/samples/SF-16_combine.jpg






More information: https://amaxsystems.en.taiwantrade.com/
Model NumberSF-16SF-40SF-50
Wire Capacity(mm) 0.2-1.6 1.0-4.0 1.5-5.0
Stirp Capacity(mm) 0.1-0.9X20 0.3-1.5X40 0.3-2.0X40
Hardness of Wire(Carbon) 80C 80C 80C
Max Feed length (mm) 150 250 250
Axes 1 or 2 1 or 2 or 3 1 or 2 or 3
Slide Accessories 6 6 6
Motor capacity(ton) Press 5 15 30
slide 0.8 3 6.5
Dimension(mm) 1580X650X1580 1920X900X1900 2910X1290X2260
Weight(kgs) 500 1900 2660
The specifications are subject to change without notice.